leadtin.com

Semis (Sheet, Plate, Rod, Bar) Category

Add a Listing       View Listings

Back to Lead, Tin & Zinc Metal

GRADES INCLUDED

  • Antimony Sheet & Bar

  • Bismuth Bar & Sheet

  • Lead Sheet

  • Lead Foil

  • Lead Plate

  • Lead Rod & Bar

  • Tin Plate, Sheet & Foil

  • Zinc Plate, Sheet & Foil

  • Zinc Rod & Bar


  • ADD A LISTING TO THE EXCHANGE


    Semis (Sheet, Plate, Rod, Bar)

    Select the material / item to buy or sell :


    Choose Wanted OR Available :


    Country:

    Email:




    AVAILABLE : Steel Plate - LA1217977
    Shipping Pt. / Location: CHINA, DONGGUAN CITY GUANGDONG PROVINCE
    D3 1.2080 steel plate. 1. Chemical composition C Si Mn P S Cu 2.00-2.30 0.40 0.40 0.030 0.030 - 2. Equivalent Steel Grade DIN/EN ASTM GB ISO TOCT JIS 1.2080 X210Cr12 D3 Cr12 X210Cr12 x12 SKD1 3.Hardening of 1.2080 D3 steel plate It is preferable to heat the tools in a controlled atmosphere. If this is not possible, pack hardening is recommended. A reducing atmosphere is desirable. Pre heat the tool steel component to 750-800C. and allow to soak at this temperature. The tools may then be brought up to 1000-1040C for air cooling, or 980C for oil quenching. Soak thoroughly at the temperature for thirty minutes per 25mm of ruling section, then cool or quench accordingly. It is important not to exceed 1020C when heating for hardening. 4. 1.2080 D3 Annealing Supplied in the annealed and machineable condition re-annealing will only be necessary if the steel has been forged or hardened by the toolmaker. To anneal, heat slowly and uniformly to 900C. Soak for three to four hours and allow to cool in the furnace to room temperature. Re-heat to 800-1040C and again soak for three to four hours. Allow to cool in the furnace to room temperature. 5.AISI D3 Stress Relieving When tools made from 1.2080 tool steel are heavily machined, ground or otherwise subjected to cold work, the relief of internal strains is advisable before hardening to minimise the possibility of distortion. Stress relieving should be done after rough machining. To stress relieve, heat the component to 600-650C. Soak well and cool in the furnace or in air. The tools may then be finish machined before hardening.
    Quantity
    Units
    Frequency
    5000
    lbs
    Month
    Price
    Funds
    Per Unit
    2020
    USD
    ton
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Copper Sheet - LA1217041
    Shipping Pt. / Location: CONGO, LUBUMBASHI DURBAN
    Copper Cathode. CATHODES COPPER SHEETS, GRADE A, Cu 99.99%, NO REGISTERED LME. SPECIFICATIONS Copper Cathodes: Cu 99.99% Purity. Electrolytic Grade A: Shape Rectangular Leaves, Size - 914mm x 914mm. Thickness: 12 mm approximate Commodity specification: Product: Copper Cathodes (electrolytic grade A) min. cu-purity: 99.99% premier degree Dimension: 914mm x 914mm x 12mm (LME standard) Weight of each sheet : 125 kgs (+/-1%) Net weight of each pallet 2 mts (+/- 1%) Min. weight in each container: 23mts approx. Gross weight of each container: 23mts approximately. Packing: palletized banded by aluminum bands CHEMICAL COMPOSITION COPPER (CU) Elements Value Elements Value Copper (min %age) 99.99% Silica (si/ppm) 0.3 Iron (fe/ppm) 2 Cobalt (co/ppm) 0.2 Sulphur (s/ppm) 4 Arsenic (as/ppm) 0.1 Oxygen (o2/ppm) nil Bismuth (bi/ppm) 0.1 Argent (ag/ppm) 10 Manganese (mn/ppm) 0.1 Lead (pb/ppm) 0.2 Teleurium (te/ppm) 0.05 Nickel (ni/ppm) 0.2 Aluminium (al/ppm) 0.5 Selenium (se/ppm) 0.3 Magnesium (mg/ppm) 0.4 Antimony (sb/ppm) 0.1 ORIGIN: R.D. CONGO
    Quantity
    Units
    Frequency
    5000
    MT
    Month
    Price
    Funds
    Per Unit
    -
    USD
    MT
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Brass Rod & Bar - LA1216752
    Shipping Pt. / Location: INDIA, JAMNAGAR GUJARAT
    Brass hex and rounded bars. Brass Rod & Bar includes all alloys of Brass in Rod or Bar form. When listing Brass Rod & Bar please state clearly the Alloy and grade and size & shape of the Rod or Bar.
    Quantity
    Units
    Frequency
    4500
    Kg.
    Week
    Price
    Funds
    Per Unit
    525
    INR
    Kg.
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    Add a Listing       View Listings

    Back to Lead, Tin & Zinc Metal

    Cooksmill NetSystems
    - File No: